AI Fire & Smoke Detection on Your CCTV
“Someone has to sit and watch the cameras.”It doesn’t have to be that way.
Everyone learns to live with the gap between “something happened” and “someone noticed.” We did not. Let the cameras do the watching and your people do the deciding — alerted the instant it matters, not hours later. From “that is just how it works” to “wait — it could work like this.”
Fire Detection That Sees, Not Sniffs
Ceiling smoke detectors wait for particle density to reach a sensor — by then, the racking is already burning. VIZO361° sees the flame or smoke on video the moment it becomes visible, which in benchmarked deployments is 30 seconds to 5 minutes earlier. It's hot-work-permit aware, so sanctioned welding doesn't create nuisance alarms. And it actuates hardware — hooter, sprinkler-zone solenoid, PA controller — via dry-contact relay, not just a phone push. Live at a polymer film manufacturer polymer manufacturing (high-flammability raw material) and a beverage bottling plant bottling plant (hot fill + steam process areas).
See VIZO361° in Action
Watch how our AI transforms existing cameras into intelligent monitoring systems
Product Demo Video
Coming soon
What You Get
Visual flame + smoke detection on live streams
Catches early combustion signatures a smoke detector will miss until minutes later.
Hot-work-permit aware — no nuisance alarms
Welding, grinding, cutting under permit does not trigger false alerts.
Hardware actuation — hooter, sprinkler, PA controller
Confirmed fire signal fires physical hardware, not just a dashboard tile.
Insurer-grade evidence pack
Every fire event ships with pre-roll clip, snapshot, camera ID, and audit trail.
Live in polymer manufacturing + beverage bottling
Proven in polymer manufacturing and bottling — both high-risk fire environments.
Existing-camera friendly + on-prem / edge
Runs on any 4 MP+ RTSP camera you already own. No cloud upload of factory-floor video.
Why Businesses Trust VIZO361°
See fire 30 sec – 5 min earlier
Visual flame and smoke appear on camera long before particle density triggers a ceiling detector.
Hot-work-permit aware
Grinding, welding, cutting under permit is suppressed by policy — no nuisance alarms, no team fatigue.
Actuates hardware, not just alerts
Hooter, sprinkler-zone solenoid, PA — dry-contact relay wired to the response, not just a push notification.
Existing-camera friendly
Any 4 MP+ RTSP camera you already have covers the same zone. No sensor rewiring, no ceiling retrofit.
The Peace of Mind You Deserve
Save the racking, not just the building
Earlier detection means the fire is contained to the source, not the entire aisle. Insurer paid-claim data shows 60–80% lower loss on early-detected fires.
Zero nuisance alarms during sanctioned hot work
Permit-aware suppression ends the 'why did fire alarm go off in Bay 3' team-fatigue cycle.
Insurer-grade audit pack per event
Pre-roll clip + timestamp + confidence + camera ID — legal + insurance defensible.
Multi-site coverage on existing hardware
One central dashboard covers 40–400 cameras across plants, warehouses, yards — no per-site sensor CAPEX.
Frequently Asked Questions
Straight answers to the questions buyers ask before they pilot.
How much earlier does AI detect a fire versus a traditional smoke detector?+
Visual smoke and flame become visible to a camera 30 seconds to 5 minutes before particle density at the ceiling triggers a traditional smoke detector. That window is the difference between saving the rack and losing the aisle.
Will welding, grinding, or other hot work create false alarms?+
No. VIZO361° is hot-work-permit aware. Active, permitted hot work is suppressed by policy for the exact zone and time window the permit covers — Bay 3 grinding suppresses Bay 3 fire alerts, not the rest of the plant. All suppression events are logged for insurer audit.
Does the system actually operate hardware — sprinkler, hooter, PA — or just send alerts?+
It operates hardware. On a confirmed high-confidence fire signal, dry-contact relays actuate the hooter circuit, the sprinkler-zone solenoid, or the PA announcement system. Where the BMS supports it, we integrate directly with the fire-alarm panel.
Can it run on my existing warehouse or factory CCTV?+
Yes. Onboarding is over RTSP / ONVIF from any 4 MP+ camera. Hikvision, Dahua, Axis, Bosch and Uniview are common in our deployments. No camera replacement is required.
What kind of evidence pack does each fire event generate?+
Each event ships with a 60-second pre-roll clip, the ignition-frame snapshot, camera ID, timestamp, and detection confidence. The audit log is immutable and configurable for DPDP / GDPR / insurer retention windows — defensible for regulator submission or insurance claim.
Book a 14-day fire-detection pilot
Join hundreds of businesses that stopped worrying and started knowing. Your cameras are ready - are you?